Deposit - Electronically Controlled Deposit Lock

Without any approvals/certificates

5 bank / 7 renter levers, 1 keyhole, dead bolt

Overview

Deposit
Deposit

Electronically controlled safe deposit lock with dead bolt.

Bank lock electronically controlled or 7,800 theoretical combinations, renter lock 280,000 theoretical variations.

To open the lock the bank lock is first released electronically, then the renter lock is released with a key, which also opens the complete lock. There is also a key-operated mechanical override for the bank lock, for use in emergency, for example a power failure. This uses the same keyhole as the renter lock.

For use in electronically controlled safe deposit installations in banks or hotels.

Features

Approvals/Certificates
Without any approvals/certificates
Lock 
Mechanical bank lock (override system for electronically controlled bank lock)
- 5 levers, electrolytic galvanised steel
- Bank key not retained
Mechanical renter lock
- 7 levers, electrolytic galvanised steel
- Renter key retained when in open position
Die-cast lock case and bolt, surface treated
Control latch steel, surface treated
Weight approx. 480 g
Admissible mounting positions
Right hand lock, opening clockwise
Mounting position lock - Horizontal (bolt left) 
Electronic release function   
Electronically controlled bank lock, connection cable 2 wires, 152 mm, cable ends tin-plated   
InterfaceFunction elementSpecificationOperating time (OT)
InputRelease solenoid370 Ohm, Umin=13 V DC13 V: 100% OT, 24 V: 48% OT
OutputControl latch contact

Normally closed, 50 mA, 30 V DC,

series circuit with release line

 

Technical Data

Lock
Deposit - standard
Options
Connection cable in other lengths on request
Control latch with separate output line, connection cable 4 wires, 150 mm, cable ends tin-plated
InterfaceFunction elementSpecificationOperating time (OT)
InputRelease solenoid370 Ohm, Umin=13 V DC13 V: 100% OT, 24 V: 48% OT
OutputControl latch contactNormally closed, 50 mA, 30 V D13 V: 100% OT, 24 V: 48% OT
Alternative operating voltage (resistance solenoid)
InterfaceFunction elementSpecificationOperating time (OT)
InputRelease solenoid148 Ohm, Umin=5 V DC6 V: 100% OT, 12 V: 87% OT,
24 V: 15% OT
InputRelease solenoid563 Ohm, Umin=20 V DC24 V: 87% OT
Accessories
Mounting plate 2 mm thick with 3 M6 threaded pins

Keys

Bank keys
MaterialLength [mm]Usable length [mm]Key bow
Bank double-bitted keys, nickel-plated
Steel608Oval
Steel7018Oval
Renter keys
MaterialLength [mm]Usable length [mm]Key bow
Renter double-bitted keys, nickel-plated
Die-cast62.522Square
Brass5514.5Oval

Documents