E-lo-safe C - Mechanical Deposit Lock

Without any approvals/certificates

Renter lock with profile cylinder, 5 pins, dead bolt

Overview

E-lo-safe C - Keys with round bow
E-lo-safe C - Keys with round bow

Electronically controlled safe deposit locks with dead bolt.

The E-lo-safe series offers a range of locks with different control features within the same basic design.

In the version 79111 the bank authorisation is effected electronically by the cable interface of the central control. The customer authorisation is effected at the safe-deposit box by a cylinder lock.

Features

Approvals/Certificates
Without any approvals/certificates
Lock 
Renter lock with cylinder
Profile cylinder Ø 22 mm, 5 pins
Opening with cylinder key after electronic release
Renter key retained when in open position
Die-cast lock case and bolt, throw 12 mm
Control latch plastic, black
Weight approx. 450 g
Admissible mounting positions
Right hand lock, opening clockwise
Mounting position lock - Horizontal (bolt left) 

Technical Data

Lock
E-lo-safe C - standard
Options
Tamper switch
Lock case and bolt surface treated
Connector
Alternative operating voltage (resistance solenoid)
InterfaceFunction elementSpecificationOperating time (OT)
InputRelease solenoid148 Ohm, Umin=5 V DC6 V: 100% OT, 12 V: 87% OT,
24 V: 15% OT
InputRelease solenoid563 Ohm, Umin=20 V DC24 V: 87% OT

Functionality

Lock function
Active release control:
After authorization at the central control a supply voltage is applied at the lock. The current feed of the release solenoid starts after the lock has been opened (key turned).
Deposit-box monitoring:
Using this concept it is possible to monitor the lock/deposit box (e.g. lock has been manipulated or box has been broken open).
Electronically controlled lock, cable 2 wires, usable length 211 mm, cable ends tin-plated
InterfaceFunction elementSpecificationOperating time (OT)
InputRelease solenoid360 Ohm, Umin=13 V DC13 V: 100% OT, 24 V: 48% OT
OutputKey/latch contactNormally closed, 50 mA, 30 V DC13 V: 100% OT, 24 V: 48% OT
Lock function
Passive release control:
After authorisation at the central control the current feed of the release solenoid starts immediately. After the lock has been opened (key turned) the current feed is interrupted.
Deposit box monitoring:
Using this concept only a limited monitoring of the deposit box is possible (e.g. box has been broken open).
Key/latch contact (separate line), cable 5 wires, usable length 200 mm, cable ends tin-plated
InterfaceFunction elementSpecificationOperating time (OT)Option code
InputRelease solenoid360 Ohm, Umin=13 V DC13 V: 100% OT, 24 V: 48% OTFSK005
OutputKey/latch contactChange over contact, 50 mA, 30 V DC13 V: 100% OT, 24 V: 48% OTFSK005

Keys

Keys
MaterialLength [mm]Usable length [mm]Key bow
Renter cylinder keys, nickel-plated
Steel517.3Round

Documents