Paxos advance IP - Electronic Combination Safe Lock

EN 1300 B/C/D, VdS class 2/3/4

12 locks, input units, IP- and I/O-Boxes, up to 100 individually scalable codes per lock, motorized dead-bolt, time delays, time lock functions, audit 10‘000, alarm connections, redundant, illuminated graphic display, network-ready

Vue d'ensemble

Safe Lock Paxos advance EEH-TA
Safe Lock Paxos advance EEH-TA

Paxos is the redundant, motorized lock for safes and vaults when it comes to providing maximum reliability, ease of use, programming and installation. Over a course of millions of operating hours, Paxos has proven technology and reliability time and time again.

The next generation Paxos advance IP is the consistent and logical advancement of this reliable and proven technology. It combines highest reliability with user-friendliness and now also allows for a simple connection of multiple lock units and input units in one locking system.

In addition, the locking system can remotely be monitored and configured via an IP network with the AS384-NETW programming software. The remote access to audit data is possible as well.

Caractéristiques

Approvals / Certificates
EN 1300 B, C, D
VdS electronic high security lock, class 2, 3, 4
VdS blocking element for IDS class C
VdS strike plate contact for IDS class C
VdS duress alarm trigger for IDS class C
Codes

100 codes per lock

with ID+PIN

  • 1 master code
  • 2 opening codes
  • 97 codes with individually scalable opening and access authorizations

Code aging, individual name for each code

with PIN

  • 1 master code
  • 1 mutation code
  • 1 time code
  • 1 net code
  • 2 AND codes
  • up to 94 opening codes, single or dual opening

with multiple lock units

  • Parallel mode
  • Partial locking
Alarm Connection

Pre-condition: IP- or I/O-Box

Outputs
3 (8 with the I/O-Box) free selectable outputs, polarity NO/NC selectable.
For instance for monitoring of lock bolt and bolt work position, duress alarm, battery status, tamper status.

Inputs
3 (8 with the I/O-Box) free selectable inputs, polarity NO/NC selectable., tamper-monitored if desired.
For instance for remote disable, time lock interruption, time delay override.

Power supply
  • Battery power supply
  • Rechargeable battery pack
  • Mains connection
  • UPS connection

Automatic recognition oft he type of power supply. Automatic change-over to alternative power supply in case of power failure.

Input Unit
Black plastic housing
Silicon rubber keypad or dial knob
Integrated battery compartment
Graphic LC display with adjustable background illumination and contrast
Full text user guidance
Operator selectable display language
Buzzer
Integrated USB interface for programming and audit
Combination of multiple input units in one system
Lock Unit
Bi-directional, motorized dead bolt
30 N moving force in both directions
Adjustable bolt travel 8.7, 12, 14, 15 mm
Bolt with 2 threads M4 and centric thread M5
Standard footprint
Standard housing dimensions
Combination of multiple lock units in one system, with main door locks and inner cabinet locks

Données techniques

Electronic Combination Lock
Paxos advance IP
Lock Unit
Bi-directional, active full-redundant motor-bolt lock
Integrated evaluation and control electronics, contains code management and full time lock functions such as date and time, summer/winter-time changeover, weekly time lock program, holiday periods, partial locking, time lock override windows
Suitable as first lock unit or as additional lock unit
Suitable as inner cabinet lock unit
Input Unit
Keypad input unit
black plastic housing with Silicon rubber keypad
graphic LC display with adjustable background illumination and contrast
full text user guidance
operator selectable display language
buzzer
integrated USB interface for programming and audit
combination of multiple input units in one system
pre-condition for: VdS class 2, EN 1300 class B
Dial knob input unit
black plastic housing
graphic LC display with adjustable background illumination and contrast
lateral limitation of visibility angle
full text user guidance
spy-proof code-entry
operator selectable display language
buzzer
integrated USB interface for programming and audit
combination of multiple input units in one system
pre-condition for: VdS class 3 and 4, EN 1300 class C and D
Options

IP-Box
Built-in terminals for external signal connection
The IP-Box is pre-condition to connect
– external power such as a power supply, UPS
– network
– signals from/to peripheral devices such as an alarm panel, remote disable actuator, etc.

I/O-Box
Built-in terminals for external signal connection
The I/O-Box is pre-condition to connect
– external power such as a power supply, UPS
– signals from/to peripheral devices such as an alarm panel, remote disable actuator, etc.

Blocking element VdS
The combined use as a numeric combination code lock and as a blocking element in the controlled sequence for arming a danger detection system can be realized with the IP-Box or with the I/O-Box together with the upgrade kit (cover).

Programming Software AS384-NETW
For monitoring, configuration of the locking system, programming of the settings and to read-out the audit. Connection through an IP network or the USB interface in input unit.
Software package including CD-ROM with software and documentation, USB cable, license dongles.
Runs on Microsoft® Windows® operating systems. Operator selectable language.

Programming Software AS384-USBW
For configuration of the locking system, programming of the settings and to read-out the audit. Connection through USB interface in input unit.
Software package including CD-ROM with software and documentation, USB cable, license dongle.
Runs on Microsoft® Windows® operating systems. Operator selectable language.

Audit Software AS384-AUDITW
To read-out the audit.
Connection through USB interface in input unit.
Software package including CD-ROM with software and documentation, USB cable, license dongle.
Runs on Microsoft® Windows® operating systems. Operator selectable language.

Fonctionnalités

Code Functions
Code format PIN or ID+PIN
Individually scalable opening and access rights (code profiles)
Code aging
Individual name for each code
Dual mode per lock unit (AND codes, dual mode)
User-related dual mode (user groups)
Parallel mode 1)
Wrong trial lock-out
Duress code (silent alarm)
Reset function (shelve)
Time Lock Functions
Normal time delay
Duress time delay
Confirmation window
Day-time related time delays
User-related time delays
Non-return time delay
Monitoring of lock open period
Fully automatic DLST (summer/winter time changeover)
Holiday periods
Yearly repeating holiday periods
Weekly time locks
Immediate locking
Time lock override by pre-programmable override windows
Time lock override by code
Time lock interruption by input signal
Time lock interruption by internal push-button
Partial locking periods (day/night mode) 1)
Time delay for day lock in partial locking 1)
Other Functions
Multi lock operation
Control of inner cabinet locks
Automatic or manual locking
Tamper monitoring
Low voltage detection
Battery status display
Opening counter
Error diagnosis, recognition and display
Programming and audit over IP network or USB/computer 2)
Audit in plain text, with search and filter functions 2)
Free programmable in/outputs 3)

1) with two or multi lock operation
2) with Programming Software AS 384 NET/USB or Audit Software AS 384 AUDIT
3) with IP- or I/O-Box

Documents